GSM-module

Price for regular customers 15,000 rubles.

GSM module: unique option for crane machines 

Messages when you turn on the machine - give an idea of the machine reboots, power outages.

You can always "call" the machine to make sure it is turned on

Service messages, etc

Reports on the number of toys won

With the GSM module You:

Save working time

Save gasoline

Do not worry about the state of the machine

Quietly fall asleep

Control your income

GSM module: unique option for crane machines
GSM-module is designed to transmit information about the state of the machine, toys, etc. Information is transmitted via SMS messages:

Messages when you turn on the machine - give an idea of the machine reboots, power outages.

The machine can always be "called" to make sure that it is turned on.

Service messages, etc.

The most effective messages - messages about the number of won toys. Now there is no need to go to the machine until you receive an SMS message that won, for example, 50 toys – half or a third of the full load in the previous visit.

With the GSM module You:

Save working time

Save gasoline

Do not worry about the state of the machine

Quietly fall asleep

Control your income

GSM-module does not Wake up, is not late and does not stand in traffic jams!
The cost of the module is 10,000 rubles.

Also, the module can always be obtained as a discount. We will give a discount on the machines if You:

Buy 3 devices in one day: 1 GSM-module for free

Buy 5 devices in one day: 3 GSM-modules for free

Buy 7 devices in one day: 5 GSM-modules for free

Buy 10 or more devices in one day: 10 or more GSM-modules for free

 

 


Configuring the controller to use the GSM module


To use the GSM module, you must install the switches on the controller Board:

Switches are located in 2 blocks. Block 1 - top, 2 - bottom.
To install, you must turn off the machine, set the switches and turn on the machine.

The GSM module is configured by switches 1 and 2 on the LOWER (2nd) block:

 

1 ↓ 2 ↓ = GSM is off
1 ↑ 2 ↓ = GSM included


In addition to SMS messages about the inclusion, errors, etc., GSM module is configured to send SMS messages about the win (flight) every 50 toys. If You have loaded the device with a known number of toys, it is advisable to "reset" the counter sending SMS. 
Turn off the machine, set switches 1 and 2 on the LOWER (2nd) unit:

1 ↑ 2 ↑ = zeroing the GSM toy counter


and switch on. After the machine performs a self-test, turn off the machine and return the switches to the:

1 ↑ 2 ↓ = GSM included


and turn the machine back on. 50 toys will be used from now on. 


Setup SIM card
To use the GSM-module you need to purchase a SIM card of one of the 3 GSM-mobile operators:.

1. Insert the SIM card into your cell phone and turn off the SIM card pin code requirement when turned on. 
THE PIN MUST BE DISABLED.

2. Go to the PHONE BOOK ON the SIM CARD and delete ALL contacts.

3. Create a contact with the name in the phone book of the SIM card www.kosh-ka.ru (in small letters) and your phone number - it will send messages to the machine. (see photo 5). The number should consist of 11 digits AND always START with the 8s (see photo 5). 

Thus, the phone book SIM card will have 1 contact with the name www.kosh-ka.ru (see photo 6), YOUR phone number, and not have a PIN code. SIM card ready to go.

4. Install its GSM module. To do this, press a thin object, such as a paper clip, on the yellow button on the GSM-module and remove the cartridge for the SIM card (see photo 7).

5. Put the SIM card with the gold contacts UP into the cartridge and gently insert it into the module (see photo 8).

6. THE BALANCE ON THE SIM CARD SHOULD BE SUFFICIENT FOR SENDING SMS MESSAGES!!!

At any time You can change your phone number to receive SMS. To do this, remove the SIM card from the module, insert it into your phone and change the phone number in contact www.kosh-ka.ru a new one.


Examples of SMS messages and the SIM card: